氟碳漆做法（Fluorocarbon paint process）.docVIP

氟碳漆做法（Fluorocarbon paint process） 1. preparation of fluorocarbon paint 1.1. Construction materials Putty for exterior wall: rough surface leveling putty, exterior wall fine surface leveling putty, polishing putty and so on. Matching primer: Cement transparent primer, intermediate paint: permanent new white primer, matching finish: exterior fluorocarbon paint or building curtain wall fluorocarbon paint. 1.2. Construction tools Main tools: horizontal gun, spray gun, knife, thread bag, wool roll, brush, air compressor, etc.. 1.3, construction environment (1) the doors and windows are installed according to the design requirements, and the holes around the openings are blocked. (2), metope processing is complete, and meet the design requirements according to the acceptance process, plastering standards, meet the spraying conditions, complete equipment, water pipe entrance pipeline installation, and near the entrance to the cave by the cement mortar, all the walls need to dry. (3) double row shelf or movable hanging blue should comply with the national safety standard requirements, the outer frame row wood from the wall 320cm. (4) request the field to have 380V, 220V power supply. (5) all finished doors and windows should be protected in advance. Construction process of 2. fluorocarbon paint 2.1 、 cement plastering surface In order to prevent the appearance of cracks and cracks on the surface of the coating, it is communicated with the first party and the construction team before the plastering of the wall. It is suggested that the metal grids be laid in concrete and brick walls to reduce cracks caused by shrinkage between concrete and brick walls. In order to prevent the cement layer from cracking, polypropylene fiber can be added to the plastering cement mortar to strengthen the anti cracking and anti seepage functions. The first time (leveling putty putty) construction leveling putty is mainly used for leveling the roughness of cement mortar plastering wall, provide a