电信猫hg522账户（Telecom cat hg522 account）.docVIP

电信猫hg522账户（Telecom cat hg522 account） Super password for HG522 (default is account number: telecomadmin Password: nE7jA%5m, if this cannot login, the explanation has been modified to be broken 2, get the super account password, and then set the PPPOE dial-up, this is different from each place, broadband type can not, set parameters are different. New user: useradmin Password: mycomputer Help documentation I. status 1. device information Display device type, device identification number, hardware version, software version and other information. 2. network side information Display connection information and DSL information. The connection information display network connection status, the PVC of the IP address, subnet mask, default gateway, DNS server information, PVC and package information; DSL information shows the current synchronization state, DSL connection status, downlink rate, noise margin, interleaving depth, line protocol, line attenuation, output power, channel type etc.. 3. user side information Display WLAN interface information, Ethernet interface information. WLAN interface wireless network connection state information display, each channel, SSID, SSID, statistical information authentication and encryption status; Ethernet interface information gateway IP address, MAC address, each LAN port state, send and receive packets and bytes. Two, network 1. broadband settings (1) status display Internet connection (2) operation Broadband settings: for broadband connections related parameter settings, after the completion of the set, the interface shows the corresponding state. WAN connection: click new connection to add a WAN connection. Click Delete connection to delete this connection. Enable: make this PVC active. Enable binding: you can bind individual LAN ports, individual SSID, and corresponding WAN ports. Mode: divided into two modes: Route and Bridge. In Route mode, there are three connection modes, DHCP (get an IP address from ISP), Static (configured