xp提速（XP speed increase）.docVIP

xp提速（XP speed increase） Start acceleration optimization First, open the system properties (on my computer right - properties, or in the control panel to open the system, the shortcut win+pause break) the Advanced tab, in the startup and recovery , open the Settings , two Chinese removed the boot zone if multiple users of the system, to retain the display list of operating system time tick. Click Edit to make sure that the additional attribute for the startup item is /fastdetect instead of nodetect. Do not add the /noguiboot attribute first, because you will also need to use the guiboot later. Two please remove the boot zone The next step is the key in the system properties to open hardware tab, open the device manager, IDE ATA/ATAPI controller, double-click to open the secondary IDE channel property, advanced settings tab, the 1 and 2 modes of transmission equipment to DMA if available equipment. If the type you can choose no to choose no, point to determine the complete set, the main IDE channel set the same method. Edit window Secondary IDE channel property Shutdown acceleration optimization Open the registry (start - run -regedit), click my computer, open the edit menu, find, enter AutoEndTasks, and find the next one. Double click open to find the result and change the value data to 1. Then you can find the HungAppTimeout, under AutoEndTasks WaitToKillAppTimeout, the value data to 2000 or less, but also to modify the menu delay time by the way here, find MenuShowDelay in the AutoEndTasks below, the value is in milliseconds, if you want to remove the menu delay to 0. Modify the edit menu, open the find next (shortcut key, F3), and install the steps you have found in a step by step method. AutoEndTasks modify window HungAppTimeout modify window Now the startup and shutdown of the acceleration have been completed, restart the computer, feel the feeling of speed start, scroll bar is not only transferred one or two laps on the OK. MenuShowDelay modify window Enjoy the