动静压磨头安装调试工艺规程（Process specification for installation and debugging of static and dynamic grinding head）.docVIP

动静压磨头安装调试工艺规程（Process specification for installation and debugging of static and dynamic grinding head） Process specification for installation and debugging of static and dynamic grinding head Tags: procedures, processes, static and dynamic, grinding head, debugging Static pressure head installation process Abstract: the observation of the transport process to check out of the box parts machine tool with no attention without refueling at the pump spindle collision machine spindle join standard about half litres of oil gas must be three layers of silk filter must pay attention to the spindle can not replace the pump motor access switch switch machine tool to inspect the work of pump motor pump motor whether the steering 2002: machine installed on the machine tool damage into the world, it is a challenge and an opportunity to increase the experts pointed out that the CNC machine tools in China R D efforts to speed up the current situation and Prospect of domestic and foreign development of the lathe of CNC machine tools in machine tool manufacturing industry service competition China milling machine and machining center market technical level and development direction of the worlds processing center the production, demand and development trend of the world development trend of domestic and international machine tool CNC cutting trend Cutting technology and the development of CNC machine tools, 1, unpacking all parts to observe the damage in the course of transportation. 2. Place the grinding head on the machine tool. Be careful not to hit the spindle of the machine when it is mounted. 3 to join the 2# spindle oil about 80 liters to about half the standard oil from the pump gas outlet must be three layers of silk cloth when refueling. Note: be sure to 2# spindle oil, can not use other instead. 4 pump motor access to the machine master switch, that is, the main switch of the machine, the pumping station motor work. Check whether the motor direction of the pump station