建筑工程施工图审查（Construction work drawing review）.docVIP

建筑工程施工图审查（Construction work drawing review） The author in the several years construction engineering construction drawing review, through a number of construction engineering construction drawing review, discovered the site plan design in architectural design, construction, building plane, elevation, section, building component related content such as design of depth and mandatory provisions are common problems in the design, are respectively summarized below: 1. General layout plan Review of the construction drawing file, basically have general layout, but express the depth difference is bigger, most engineering only do plane location map, is not in conformity with the depth of the documentation provided for design of building project related requirements. The main questions are: 1. The general plan should have a certain scope. Only the land area is not enough, the road, buildings and structures planned for the site should be adjacent to the original plan, and most of the construction drawings only have the layout of the site. 2. Preserve the original topography and ground objects. The site measuring coordinate network and measuring elevation, including the measuring coordinates (or positioning dimensions) of the sites four neighbors, some of the projects general drawing designs are often unreserved. 3. Vertical design. It is usually only the height of the relative field of the design of the buildings with the design of plus or minus 0.000, which is only the high difference between the indoor and outdoor areas. The result is: (1) the vertical design elevation does not meet the control elevation of the planning department. (2) there is no reasonable connection between the urban roads and the outside of the site. The elevation of the field and its roads is not conducive to drainage. (4) the field road design level, especially in the junction, the entrance of the building, also do not have mark long road slope, slope direction, slope, and the critical level of the gr