KT-328K 全自动高产能锯料机Full Automatic high efficient cutting.DOC

KT-328K 全自动高产能锯料机 Full Automatic high efficient cutting machine 本机为NC全自动高产能铝、铜料锯切机，特殊锯切工作设计。 锯片采用伺服电机，螺杆直线往复运动，稳定性好。 不受工作环境影响，进给、退回速度程序任意控制，切断材料后由可调气缸控制将已切断材料左向拉开，待切断材料由数控送料装置右向拉开，此特殊设计是为了避免材料在加工过程中受锯片回刀而影响已加工及待加工件的表面粗糙及精度所专门设计的，从而使材料加工表面可达：Ra3.2μm，精密度提升至：±0.05，剩余尾料≤200mm。 This is a productive automatic NC control cutting machine for aluminum and copper profiles. Special cutting design and servo motor, ball screws, ensure stable operation. Profile feeding and retracting speed can be adjusted arbitrarily by NC system. After the blade cuts off the profile, before the cutting blade retracts, the cut-off profile will be pulled leftward, and the raw profile will be pulled rightward, then the cutting blade retracts. This special cutting design, can ensures the smooth finish on the profile. Therefore, it can ensures the surface roughness reach Ra3.2μm, and precision up to ±0.05, and rest profile less than 200mm. 主要技术参数…………………4.5~830mm 2.锯切（宽度×高度）…………………200×100 3..主切削电机功率…………………2.2kw 4..送料伺服电机功率…………………1kw 5..耗气量........................……200L/min 6.锯片尺寸........................……Φ355×Φ25.4×120T/δ2.5 ........................……Φ255×Φ25.4×120T/δ2 7.锯片进给速度........................……0~7.2m/min 8.锯片返回速度........................……0~7.2m/min 9..工作气压........................……0.6~0.8MPA 10..工作电压........................……380V 50HZ 11.总功率........................……2.2kw 12.外形尺寸（L×W×H)：………………2180mm×1058mm×1400mm Main Technical parameter: 1.Saw cutting length.......................……4.5~830mm 2.Saw cutting (W×H).......................……200×100mm 3.Main motor power.......................……2.2kw 4.Profile feeding servo motor power.......................……1KW 5.Air consumption capacity........................……200L/min 6.Saw blade dimension.......................……Φ355×Φ25.4×120T/δ2.5 / .......................……Φ255×Φ25.4×120T/δ2 7.saw blade feeding speed.......................……0~7.2m/min 8.saw blade retracting speed.......................……0~7.2m/min 9.o