机械工程栏目2013年至今已发表文献索引-四川大学学报.DOC

2013-01 Wang Jiaxu，Qin Decheng，Zhang Linchuan, et al. Transient thermal micro-elastohydrodynamic lubrication model of filtering reducer[J]. Journal of Sichuan University: Engineering Science Edition, 2013, 45(1): 202-207. [王家序，秦德成，张林川, 等. 滤波减速器轮齿表面瞬态微观弹流润滑模型[J]. 四川大学学报:工程科学版, 2013, 45(1): 202-207.] Yang Zuowei, Zhao Shiquan, Zhou Jin, et al. Large-capacity steam turbine parametric design model and characteristic attributes of oil turbine[J]. Journal of Sichuan University: Engineering Science Edition, 2013, 45(1): 208-214. [杨佐卫，赵世全，周进，等. 大型汽轮机油涡轮参数化设计模型与特征属性[J]. 四川大学学报:工程科学版, 2013, 45(1): 208-214.] 2013-02 Liang Shangming, Zhang Jie，He FeiFei. Study on flash temperature of swing movable teeth transmission[J]. Journal of Sichuan University: Engineering Science Edition, 2013, 45(2): 176-181. [梁尚明，张杰,贺飞飞. 摆动活齿传动齿面闪温研究[J]. 四川大学学报:工程科学版, 2013, 45(2): 176-181.] Kuang Yuchun, Shu Feng, Wu Longmei, et al. Numerical simulation method of forming grinding wheel contour for complex spiral curved surfaces[J]. Journal of Sichuan University: Engineering Science Edition, 2013, 45(2): 182-187. [况雨春,舒峰,吴龙梅，等. 复杂螺旋曲面成形磨砂轮廓形数值仿真方法[J]. 四川大学学报:工程科学版, 2013, 45(2): 182-187.] Li Xiulan, Qin Sicheng, Yang Hongtao. Shift strategy of construction vehicle based on multi-scale wavelet neural network[J]. Journal of Sichuan University: Engineering Science Edition, 2013, 45(2): 188-192. [李秀兰,秦四成,杨宏韬. 基于多尺度小波神经网络的工程车辆换挡策略[J]. 四川大学学报:工程科学版, 2013, 45(2): 188-192.] Jiao Xiaoyang, Liu Jianfang, Gu Fengchun, et al. Analysis and research on jetting ability of the jet dispensing valve driven by a piezostack[J]. Journal of Sichuan University: Engineering Science Edition, 2013, 45(2): 193-198. [焦晓阳，刘建芳，谷峰春，等. 压电喷射点胶阀的喷射性能分析及实验研究[J]. 四川大学学报:工程科学版, 2013, 45(2): 193-198.] 2013-03 He Mingge, Lin Lijun, Yin Guofu, et al. Study and design of an intelligent downhole throttle system[J]. Journal of Sichuan University: Engineering Science Edition, 2013, 45(3): 151-157. [何明格,林丽君,殷国富，等. 井下智能节流及智能节流器系统开发[J]. 四川大学学报:工程