JC长轴深井泵使用方法.pdfVIP

苏华泵业 苏华泵业 苏苏华华泵泵业业 中国优质产品 ISO9000认证 JC 型 长 轴 深 井 泵 JC 型 长 轴 深 井 泵 JJCC 型型 长长 轴轴 深深 井井 泵泵 JC TYPELINE-SHAFTDEEPWELL PUMP 产品简介 PRODUCTIONINTRODUCTION JC 型系列深井泵结构先进，采用亚什兰树脂工艺制芯，叶轮、导流壳流道部位使用环氧涂 复新工艺、水力模型先进、性能曲线无驼峰、高效区域宽广，采用甩沙式防沙环，迷宫结构， 使沙子无法进入轴承，传动轴采用先进的热校直工艺，是新一代节能型提水机具。 流量：≤2500m³/h 扬程：≤350m 电机功率：5.5-710KW 额定电压：380V,6KV,10KV 井径：100-750mm 最大排出口径：450mm JC series deepwell pumps are new generation and energy-savingequipment forlifting water. Theyare withadvanced structure, fortheyadoptingthe core produced withthe resin sand and the impellerdiffuser adopting the new technique that top coated withepoxy, advanced hydraulic model, excellent performance curve without hump and wide high efficiencyrange. Theyuse whirl sand device and the maze-like structure which makes sand not able toenterthe bearings. Shaftis checked byflame method toensure itis inline. Capacity: ≤2500m³/h Head: ≤350m Motor Power: 5.5-710KW Rated Voltage: 380V,6KV,10KV WellDiameter: 100-750mm Max Discharge Diameter: 450mm 应用范围 USEAGE RANGE JC 型长轴深井泵适用于从水井中提取常温无腐蚀性的清水，广泛应用于水电站（检修、渗 漏排水用泵），火电厂（循环降温，生活用泵），钢厂（铁皮坑用泵），消防，城镇水厂供水 及农田灌溉。 JC series deepwell pumps are applied tolift normal temperature clean water without erosive for water power plant(in an overhaul and leakage), power plant(when reduce thetemperature inthe recycle, and for domestic service), steelworks(for scale pit), fire-fighting, urbanwater supply by water plant and agriculture irrigation. 安装使用方式 INSTALLATIONMETHOD 深井提水 水池江河排水 筒式安装抽水凝水 管道增压 Lift water from Drain water from cistern Barrel mode installation Increase water pressure deepwell for waterdrainage inconduit 内燃机驱动直角齿轮箱传动 内燃机驱动皮带