卫星接收卡常见故障和处理方法(国外英文资料).docVIP

卫星接收卡常见故障和处理方法(国外英文资料) Common faults and processing methods of satellite data receiving software 2008-02-26 08:22 question 1: what are the common hardware failures of satellite receive cards? How to judge the solution? The main hardware failures of the satellite receive card are as follows: Install the hardware, boot into the operating system, but the system can not find new hardware. The system may find new hardware (the new satellite receive card), but cannot install the driver for the receive card. After installing the driver correctly, the X or sign displayed in front of the satellite receiving card is displayed in the system manager [system manager] even if the satellite receive card device is installed properly, when the satellite channel program or software is received, the system prompts the receiver card to be invalid. There are other faults, too. The above situation can basically be judged as the hardware failure of the receiving card, and the solution is as follows: Clean the pin of the satellite receiving card, replace and install the slot position of the satellite receiving card, and see if the trouble is removed, if not The method eliminates the use of another piece of normal satellite receive card on the same computer. If normal, it can be judged as the hardware failure of the receiving card, and the solution is to contact the supplier for further processing. Question two: in the device manager, the front of the receive card will appear red or yellow. How can I solve this problem? Encountered [network adapter] in front of the receive card appear red X or yellow disappeared, such as can not be eliminated. If there is a problem, there is a red drive or hardware problem. If it appears in other form [other devices], it can be straight Double click it to install its driver, or select changes to the scanning hardware in the actions menu, etc., and the system appears to install the new hardware Component wizard prompt box, the device driver is installed ac