胶囊填充机原理(外国英文资料).docVIP

胶囊填充机原理(国外英文资料) P: 1) the NJP automatic capsule filling machine manual 1. An overview of the Power power: 380V 3phase 4 line 50HZ 5.68 KW Compressed air: 0.03 m3 / min, pressure 0.4 mpa Working environment: 21 ℃ + 3 ℃ relative humidity: 40 ~ 60% Device makers: Telephone: Web site: Model NJP - 800 NJP - 1200 Maximum capacity (grain/min) 800, 1200 The filling capsule type 00 # - 5 # # - 5 # The probability of a capsule is greater than 99% The quantity difference is less than 5% Total power (kW) 3.53 5 Power 380V, 50Hz Appearance size L * W * H (mm) 700 * 900 * 800 * 800 * 2170 Weight (kg) 700, 900 Structure and principle 1.2.1 structure The structure of the automatic capsule filling machine by blanking device empty capsule, capsule distribution device, powder feeding device, measuring plate of institutions, capsule filling sealing mechanism, the main transmission mechanism in the cabinet and electric control system, etc. 1) empty capsule material device: consists of the hopper and the conveyer line, the main storage of empty capsules and the vertical entry of an empty capsule into the total unit of the capsule. 2) capsule distribution device: make empty capsules into the distribution of the device and fork, and fork down action will send under six capsules at a time, and glue cap on. At the same time, the vacuum separation system moves the capsule into the module and separates the body cap. 3) powder feeding device: the powder, powder, fights the screw, the material conveying pipe and so on, under the action of main mix in the screw and the storage of powder with control into the measuring plate. Measuring plate: the size of the gauge according to the size of the capsule and the size of the filling. The powder is placed in a measuring disc of the intermittent rotation, which is filled in five times, and pushed into the capsule of the lower module. 5) capsule filling and sealing mechanism: when the capsule is placed under the capsule, the upper and lower part of the ca