科目三考试流程及扣分标准(外国英文资料).docVIP

科目三考试流程及扣分标准(国外英文资料) The driving licence test is complete 1, getting in the car: Student id to the cabin door to safety personnel for authentication, security officer after verification get ready to instructions (press car button, similarly hereinafter), car voice issued a XXX on preparing for the examination of voice prompt. The learner gets in the car after a weeks inspection. In the course of the car inspection, the voice of the car is going through the engine, passing the rear. The test car is in a static state (extinguishing, idling, closing the door of the lights, the door of the cab). Check the cars appearance and safety (100 points) for a week. Open the front door and observe the traffic (100 points). The door is closed. (100 points) 2, start After students get on, adjust seat, adjust and observe both inside and outside rearview mirror, fasten your seat belt, the on-board voice prompt please immediately start according to the voice prompt to complete the test, students according to the behavioral essentials started marching after a distance, vehicle-mounted voice prompt start to finish, in accordance with the provisions, the examination route. Adjust the seat, rearview mirror, check instrument (5 points). Fasten your seat belt (100 points). When starting up, the gearbar is in the gap (10 points). Release the boot switch (10 points) when the engine is started. Before starting, observe the left and rear traffic condition (100 Points). Open the left turn light (20 points). The loudspeaker (10 points). Loosen the stationary brake (10 points). The vehicle does not shake (10 points) when it starts. The accelerator pedal control is reasonable (5 points) when it starts. 3, linear driving Keep the car in a straight line (100 points). Speed reduction measures (100 points) when the front car is braking. The rear-view mirror was used to observe no more than 20 seconds (10 points). To understand the speed of the vehicle, add and reduce the gear according to the situation