3D模具制作流程及规则.doc

千挑精雕网 北京精雕图培训制作教程 精雕图制作系列教程 一般3D模具的制作流程及规则 支持网站：/ 一般3D模具的制作流程及规则 这是精雕行业滴塑模的一种，我们公司叫它3D模具。它主要适用于面积小 有样板 需胶粘一次成型的服装 手套行业。下面我们简单阐述它的制作流程及必要的制作规则： 1首先把带有TPR图案的样板摆放整齐，手套左右手需对称（字母除外）。然后整体镜像。例如图（1） 2扩缩出图案或字母部位0.5MM的底层边界和0.8MM宽的胶墙，具体尺寸如图（2）所标： 3随后便可生成路径了。依次的铣削深度为：整体大面[平底]-6mm铣削0.5mm深,打平和留出布料余量 图案外再刻下去1MM身 具体参数如图： 需要注意的是 胶墙外用表面雕刻效果 4图案底层刻0.7MM 如图： 字母图案再刻0.8MM深 如图： 5至此基本就做完了 再有就是 用适当的小刀把客户型号和SIZE刻0.2深 最后再切板 如图： 6到次我们的3D板就做好了，请看一下模拟雕刻出的效果图： 7最后再注明一点，在摆样板时要将两个样板之间留出8MM的裁料余量。并且样板和外边框之间也要留出8MM的裁料余量。在输出路径之前要按最外边框外扩15MM的对板线，输出原点按路径左下角输出。 更多北京精雕相关教程文档和北京精雕图库请去我们的网站查看 for examination and approval, to return part or all of the loan in advance. 5.8 contract contract specific requirements: first, the borrower and other clients; Second, loan person double charge and other parties signed a contract with the borrower and agent signature of contract; Third, customers signed loan contract, contract of natural person, must be checked and fingerprinted by himself, you may not use personal name instead be signed, shall not authorize others to sign; Four, the pledgor, mortgagor due to special reasons not to sign the contract, may authorize others to sign the contract and retained after the notary notarized power of Attorney (parties abroad, outside the territory of China sent or delivered by a power of attorney shall be certified by the notary public of the country, and certified by the Embassy or Consulate in the country). Agent required to audit mandates are clear, the content is complete (a power of Attorney sample record form five), whether the expiration date within PART_STORE_00102). Rule2 2nd set of goods was moved to the 2nd from the left the cage inside the vehicle Click on smart properties of oriented window screen to the right of [login rule] the period of validity, and audit the original identity card of the authorized person, and keep copies. Contracts signed by the authorized person authorized, in the signature bar marked authorized person, and signed by the authorized pe