BIOS中优化内存的方法(国外英语资料).docVIP

BIOS中优化内存的方法(国外英语资料) The importance and position of memory in the computer is next to CPU, and its quality has a crucial influence on the computer performance. To fully exploit the memory potential, the memory related parameters must be adjusted in the BIOS setting. Below for slightly older Intel Pentium III and Celeron II processor Intel 815E/815EP chipset, VIA (via) 694X chipset and support AMD Thunder bird (Thunderbird) and Duron VIA KT133/133A (Dragon drill) chipset motherboard processor, how in the most common Award BIOS 6 memory optimization set. The memory settings are relatively small for the motherboard and the lower version of Award BIOS that used the earlier chipset, but the setup method described in this article is equally applicable. Intel 815E/815EP chipset motherboard motherboard in this type of BIOS Advanced Chipset Features (Advanced chipset features) the settings page generally contains the following items: Set SDRAM Timing memory settings By SPD (according to SPD to determine the timing of the memory options: Disabled, Enabled). SPD (Serial Presence Detect) is a small chip on the memory chip, which stores the working parameters of the memory bar. If you use a good brand of memory, it can be DRAM Timing By SPD is set to Enabled, at this time, there is no need to set the BIOS memory parameters described below, the system will automatically determine the operating parameters according to the data in the SPD memory. Some memory of the SPD SPD parameter is compatible with empty heads or feel a certain brand of memory is more conservative, to fully tap their potential, you can set this parameter to Disabled, then you can adjust the following parameters of memory. SDRAM, CAS, Latency, Time (memory CAS latency) optional: 2, 3. Memory CAS (Column, Address, Strobe, column address strobe pulse) delay time control SDRAM, memory received a data read instruction, how many clock cycles to wait before the actual implementation of the instruction. This parameter