AmericanCertificationBody,Inc方案.PDFVIP

2016年4月期 American Certification Body, Inc. 1. IC已经更名为ISED。 Please note that Industry Canada (IC) has changed its name to Innovation, Science and Eco- nomic Development Canada. 2. RTTE指令新旧版本的使用时间，即在2017/6/12之前旧版的RTTE指令可以使用。 Products placed on the market before 13 June 2016: RTTE Directive 1999/5/EC is applica- ble. Products placed on the market in the period of 13 June 2016 until 12 June 2017: RTTE Di- rective 1999/5/EC or Radio Equipment Directive 2014/53/EU is applicable. Products placed on the market on 13 June 2017 and onwards: Radio Equipment Directive 2014/53/EU is applicable. 3. FCC对于1GHz以上辐射发射测试所用的场地确认的要求。频率范围从30MHz到1GHz的辐射发 射测量的场地确认根据ANSI C63.4-2014；频率范围从1GHz到40GHz的辐射发射测量的场地 确认有两种选择。从2018年7月13日开始，测试场必须符合CISPR 16-1-4:2010-04的要求。 Question: What are the site validation requirements for a radiated emission test site used to make measurements above 1 GHz? Answer: The site validation requirements for radiated emissions compliance testing of unintentional (ANSI C63.4-2014) and intentional radiators (ANSI C63.10-2013) on an open area test site (OATS) (or alternative test site) are specified in Section 2.948(d). In general, test sites used for radiated emission measurements are required to comply with AN- SI C63.4-2014, and validation of the test site shall be confirmed no less than once every three years. Test sites used to measure radiated emissions in the 30 MHz to 1 GHz range are required to comply with the site validation requirements in clause 5.4 of ANSI C63.4-2014. Test sites used for radiated emission measurements from 1 GHz to 40 GHz are required to meet the site validation requirements below: ANSI C63.4-2014 provides two options for test facilities used to make radiated emis- sio