CMG-IMEX建模.docVIP

Computer Modelling Group Ltd. Tutorial Building, Running and Analyzing a “Black Oil” Reservoir Simulation Model Using TABLE OF CONTENTS LIST OF FIGURES 2 Creating a “Black Oil” Model using Builder 4 Starting CMG Launcher 4 Opening BUILDER 4 Creating the Simulation Grid (structural data) 4 Assigning Porosity Permeability to the Model 8 Creating PVT Data 9 Creating Relative Permeability Data 11 Creating Initial Conditions 13 Incorporating Well Trajectories and Perforations 14 Adding Historical Production Data to the Model 17 Creating Average Monthly Production / Injection Recurrent Well Data 18 Creating Field Production History (*.fhf) for History Match 19 Well Definition and Constraints 20 Write Out Restart information to a Restart File 24 Running the IMEX Dataset 24 Reviewing the Simulation Results using RESULTS GRAPH and RESULTS 3D 25 Creating a Flow Property versus Depth (PLT) plot 26 Using the Historical Data Restart File in a Prediction Run 28 Using the Trigger Option to control the Injection based on Sector Pressure 31 Add a Hydraulic Fracture 35 Adding an Aquifer 42 Analyzing the Data 44 Further Analysis 45 Extra Exercises 50 LIST OF FIGURES Figure 1: New IMEX dataset with contour maps open 4 Figure 2: Contour Map with Orthogonal Corner Point Grid 5 Figure 3: General Property Specification Spreadsheet 5 Figure 4: Specifying a Geological Map for a Property 6 Figure 5: 3D View of Reservoir after Property Specification 7 Figure 6: Removing the Contour Map from the Display 7 Figure 7: Property Specification Spreadsheet with Grid Top, Thickness Porosity Specified 8 Figure 8: Components Tab in the Tree View 9 Figure 9: Creating a Quick Model 9 Figure 10: Parameters for Quick Blackoil Model 10 Figure 11: IMEX PVT Table with Values Generated using the Quick Black Oil Model 11 Figure 12: Plots for RockType 1 12 Figure 13: Initial Conditions interface 13 Figure 14: Trajectory Properties Window Step 1 of 3 14 Figure 15: Trajectory Properties Window Step 2 of 3 15