资料员培训教材(国外英文资料).docVIP

资料员培训教材(国外英文资料) Normative learning content GB50202-2002 code for acceptance of construction quality of foundations and foundations of buildings 1, the foundation of sand and gravel foundation, geosynthetics foundation, fly ash foundation, dynamic compaction, foundation grouting, preloading foundation, to test the strength of the foundation bearing capacity, each unit project should not be less than 3 points, more than 1000m2 per project, 100m2 should have at least 1 points, more than 3000m2 project. Each of the 300 M2 should be at least 1 points, each independent basis should be at least 1 points, 1 points every 20 extension of the Mi Yingyou foundation. 2, the soil cement mixing pile and high pressure jet grouting pile composite foundation, sand pile foundation, vibroflotation pile composite foundation, soil and lime soil compaction pile composite foundation, composite foundation of cement flyash gravel pile and rammed soil cement pile composite foundation, bearing capacity test, the number of 0.5%~1%, not less than 3. Single pile strength test of the number of 0.5%~1%, a lot of 3. 3, the lime soil foundation has the mixture ratio, the stratification backfill compaction coefficient examination. 4, sand gravel cushion has mixture ratio, layered backfill compaction coefficient test. 5, lime test report, there are lime particle diameter and coating organic content test. 6, sand gravel cushion and sand have retest report, there are sand stone, organic content, clay content, particle size and other testing, cement soil mixing pile bearing, take 90d specimens. 7, the fly ash foundation, fly ash has re reported, there are fly ash particle size, alumina and silica content, burning vector and so on. 8, every 50 m3 pouring pile must have 1 groups of specimens, less than 50 m3 piles, each pile must have 1 sets of specimens. 9, static pile, sulfur, clay semi-finished products should be a group of 100kg each test pieces (3 pieces). 10, finished piles have product qualification