松下29P200G、34P200G电视机型维修速查 .(国外英文资料).docVIP

松下29P200G、34P200G电视机型维修速查 .(国外英文资料) Panasonic 29P200G, 34P200G TV model maintenance speed check. 1. Noise is big, usually C2398 is bad; The left sound channel is low, usually C2313 bad. The color is abnormal, usually Q955, D354 and IC351. Green, usually C3062; No red, usually D364; The image is red, usually IC1102. The image is yellow, usually R371. Green light and protection, usually IC352; The image has a green line, usually the IC1315. Image negative image is black spot, usually DG plate virtual welding; The black screen has interference lines, which are generally bad for C1513, C1514, C1515. The sweep line is D558, D385, IC351, IC353. After the heat engine, the red sweep line is usually C1515. The image is dark, usually R560, R586; The image is a malleable, usually C116 and L1106. The image is white, usually D354. The image contrast is insufficient, usually IC2708 bad; The image is blurred, which is usually D560, C560, and T551. The inability to lock the table is generally bad for U. There are fewer platforms, usually TNR001. The image is sometimes not, usually Q882; No images, usually R526, D354, L353, L3004, Q3072, and U. Poor signal, usually TNR1; There is no sound like, usually DG plate virtual soldering or line A21 loose. The remote control power failure line is reduced, usually R514, U plate bad. Image left, usually DG plate bad; Image distortion, usually DG plate bad; Remote control failure, general RM1001 bad; The top folds of the image are generally bad for the DG plate; No sound, usually IC2708. No power supply, usually IC801. Sometimes it cant be turned on, usually at IC851; Automatic shutdown, which is generally bad for U or DG. Automatic shutdown of the engine after the engine, usually for IC2708; Turn on protection red light flashing, generally R874, C2303 bad; If you cant drive a machine, its usually an IC2301. The shutdown is not scheduled, usually for the U plate. Without turning on, check the R874, C820, C874, C874, C858, C2303, D809, D811, Q88