效果器(国外英文资料).docVIP

效果器(国外英文资料) Rp300 manual 2007-4-24 13:42:51 Rp300 manual ~! 1 the tone switch is pressed simultaneously to enter the bypass bypass state while holding down the entry into the tuner mode The 2 channel switch is used to switch the A/B of the same tone. The two channels and the tone switch on the right side are pressed and turned on Learn-A-Lick function The more than 3 function knob has different functions in different modes. When used, it can adjust the distortion, low frequency, intermediate frequency and high frequency When you edit the tone of the volume, adjust the parameters corresponding to the selected tone, and adjust the rhythm when you turn on the drum Beat speed volume 4 tone editor key used to enter the tone edit mode and switch to edit the tone module in Learn-A-Lick mode to change Variable playback speed 5 drum machine key, turn on drum machine, Rhythm lamp light up 6 when the tone indicator plays, indicate what tone is in use and edit the tone to indicate the tone that is being edited 7 liquid crystal display window, different modes of use, display different content 8, the tone storage key, edit the tone, and use this key to store More than 9 function pedal can control almost all timbre parameters in real time 1 guitar input jack 2 audio input jack, connected to the CD and other audio output signal, used to use Jam-A-LongLearn-A-Lick function recording Monitor accompaniment When the 3 left channel output hole is connected with the mono channel speaker, the left channel signal is output when the jack is connected to the mixer or the stereo speaker 4 right channel output hole connected to the mixer or stereo speakers, the output of the right channel signal 5 earphone output jack connects with stereo earphone 6 power input jack Note that when the guitar speaker is connected, if the speaker has an external effect, the loop function will connect the RP300 signal output to the speaker effect Loop input jack to minimize sound exposure Usage patterns and speci