V10型自动水份测定仪使用说明书(国外英文资料).docVIP

V10型自动水份测定仪使用说明书(国外英文资料) V10 type automatic moisture analyzer manual Catalog A, V10 type automatic moisture analyzer basic operation process..................... Three Two, matters needing attention................................................ ......... .4 Three, overview............................................................... Five Four, the basic structure and principle of instrument.......................................... Seven Five, key function................................................ 10... Six, performance parameters...................................................... 12... Seven, installation and commissioning...................................................... .13 Eight, calculation method...................................................... ..20 Nine, fault analysis and troubleshooting............................................. 21. A V10 type automatic moisture analyzer basic operation process 1. according to the instructions with moisture analyzer; 2. turn on the power; 3. according to the actual operating parameters need to be set; According to the 4. button, the system according to their own settings until the pipeline emptying, no bubbles and uniform reagent; 5. press the test key system according to their own settings, add solvent, stirring, until the completion of blank titration, titration; 6. take an appropriate amount of water sample was added to the cup, the input water standard sample quantity M standard, according to the confirmation button to stir. Press the test key drop to end point alarm, press OK to calculate water equivalent, then click confirm button to enter sample M interface; 7. samples (the best moisture moisture is similar with the standard sample) was added to the cup, the input samples M, press confirm button to stir. Press the test key, according to the system settings (low water samples, titration speed must be set to medium or slow) by titration to the end point, and calculate the water content of X=, pr