FANUC 系统功能介绍-中英文对照(国外英文资料).doc

FANUC 系统功能介绍-中英文对照(国外英文资料) FANUC - English control system function introduction 1, the number of trajectory control (Controlled Path) servo axis CNC control group (feed). When processing each form a tool path, each group can move independently, also can coordinate motion at the same time. 2, the number of control axis (Controlled Axes) / CNC axis servo control of the total number of each trajectory. 3, the linkage control axis number (Simultaneously Controlled Axes) servo axis number of each trajectory and interpolation. 4, PMC (Axis control by PMC control axis) by PMC (programmable machine controller) servo axis control. The control command in the PMC program (ladder diagram), therefore modify the inconvenience, this method is usually used for feeding and moving fixed axis control. 5, Cf (Cf Axis Control) axis control (T Series) lathe system, the rotary position of the spindle (angle) control and other axis as implemented by servo motor. The shaft and other feed axis interpolation processing, arbitrary curve. 6, Cs (Cs contouring control) contour control (T Series) lathe system, the rotary position of the spindle (angle) control is not used by the FANUC servo motor spindle motors. The position of the spindle (angle) installed in the spindle (not spindle motor) detection of high resolution encoder, the spindle is as servo axis, velocity: degrees / minutes, and together with other axis interpolation processing, contour curve. 7, rotary axis control (Rotary axis control) will be set to the rotary shaft axis angle position control. Rotary week view available parameter is set to any value. The FANUC system is usually to the basic shaft outside the feed shaft for rotating shaft. 8, the control shaft (Controlled Axis Detach) from a specified control servo axis from the CNC without the alarm system. Usually used for turntable control, machine tool without plug function will execute the motor when the turntable turntable, turntable off. 9, servo shutdown (Servo Off) PMC sig