喷绘与写真输出的DPI数值（国外英文资料）.docVIP

喷绘与写真输出的DPI数值（国外英文资料） Note that the black part will be black, otherwise the black section will appear in the black section and affect the overall effect. Image storage requirements: The image of painting and painting is best stored as a TIF format, but be careful not to use compressed format Techniques and techniques in post-production Postproduction is an indispensable part of the painting industry, which plays an important role in the success or failure of the entire work. A quick and delicate postproduction can not only add to the icing on the cake, but also create a greater economic and corporate reputation for the company. The post-production concept is extensive, and virtually all of the design work is post-production. For example: output, clipping, laminating, mounting, splicing, etc. With my own experience and the actual situation of our company, I will give a little explanation of the later work. Output: image design and production after the completion of the first job is output, in this process, the output image must merge all layers (layer), generally need to deposit into.. Tif or JPG format, if the image is on the apple production, must have the suffix. For the size of the image, the basic keep in 100 dpi output precision could be achieved with up and down, if the surface is very big, to be output image points is not appropriate to reduce, ensure that the size of the image in more than 40 m. There are a few things to note about this process: first, the paint is different from printing, and the paint is much more beautiful than the printed colour. Therefore, the RGB schema must be set in RGB rather than CMYK mode. Print image drawings are very big, some faults are large zoom in imperceptible in print output becomes obvious after exaggerated, and it cannot pass samples to find, so print images in the finished must be enlarged to 100% carefully check it again. For many pictures of words, be careful to proofread them. Because there is no such thing as a rea