理光数码复印机维修代码大全（国外英文资料）.docVIP

理光数码复印机维修代码大全（国外英文资料） Light digital photocopiers maintenance code Double-click the auto-scroll publisher: QQW release time: read: 269 times Light digital photocopiers maintenance code E001 The main motor (M1) is abnormal; The main motor substrate is not normal; The main substrate is not normal; The coding sensor (PS7) is not normal, when the printing drum rotation indicates the light, the encoding sensor; (PS7) cant check the edges in one second. E002 The electric motor (M2) is abnormal; The lifting cap sensor (PS9) is abnormal; The lower and lower limit sensors (MS6) are not normal; The driving substrate is abnormal; The main substrate is not normal; The elevator is not functioning properly; When the lift motor (M2) moves up in 9 seconds the lift is unable to reach the upper limit of self-check information indicating the light is on. When the lift motor (M2) is moving down in 9 seconds the lift is unable to reach the lower limit and the self-check information indicates that the light is on. E003 Cutting motor (M5) is abnormal; The cutting limit on the operating side (MS1) is not normal; In the non-operating side (MS2) the cutting limit is abnormal; The driving substrate is abnormal; The main substrate is not normal; The wax paper is part of the cutting device. The cutting motor will not be able to reach the limit switch of the removable cutting tool in three seconds when cutting motor signal. E004 The combination indicator is abnormal; The transformer device is not normal; The CCD is abnormal; The AD base is not normal; The main substrate is not normal. Combined lamp brightness check, the amount of light received by CCD cannot reach the scale (only one light check, the power is closed) E005 The ink roller is not normal, the motor is not able to touch the switch within 15 seconds. E006 The contact machine is not normal and the motor has failed to touch the switch within 25 seconds of the rotation of the contact motor. E008 1 \ F baseboard device is not normal; The I