新房装修科学安装电线方法（国外英文资料）.docVIP

新房装修科学安装电线方法（国外英文资料） New house decorates scientific installation wiring method 1, commonly used in socket for single core 2.5 square wire, more than 3 horse air conditioning with single core 4 square wire, single core 6 square wire used for the into the line, double color line used for ground wire. Three roll into a set of 2, according to the different color (with zero line, fire, earth) used in lighting lamps and lanterns for single core 1.5 square wire, according to the different color two volumes for a group of (for zero line, the line of fire). 3, two core, three core sheath line is to be used for the line of bright line, use for construction of construction site more, domestic outfit is not used very much. 4, audio line as thick as possible, the proposal chooses 2 * 2 * 2 or 1.5 1.2 specifications 5. Television distributor to share, the more television signals, proposal as far as possible choose under 6 distribution. One, DBJ08-20-98 stipulates that every household appliance should meet the following criteria: Each housing unit must have a built-in housing distribution box. The occupant distribution box sets up the main switch, which can cut the phase line and neutral line at the same time, and has a disconnection mark. Each residence shall have a meter, and the meter box shall be installed in the public parts in the layered set. The power supply switch should be switched on and off in the residential distribution box, and the total switching capacity should not be too large or too small. To avoid the phenomenon of jumping off the lock with separation. The meter box is installed on the common channel, which is for easy copying and management, and the built-in wall installation is for non-occupying the public channel. The design power of the small set (use area not less than 38M2) is designed to be 4KW. The middle cover (use area not less than 49M2) is designed with power of 4. 6 kw; The large set (use area not less than 559m2) is designed with power of 6-8kw. 3