庆阳户户通电视安装调试教程（国外英文资料）.docVIP

庆阳户户通电视安装调试教程（国外英文资料） Procedure of installation of door to door box West peak azimuth: south by 25.10, elevation: 45.82 When the box is not energized, SIM CARDS and smart CARDS are installed on the set-top box. Install the antenna of the set-top box, connect the set-top box and TV with the AV line and connect the set-top box to the satellite receiver. Turn on the TV and set-top box and set the set-top box with the remote control. Click the remote control (menu) button, select [system Settings], enter the password 9999 to enter Settings; 4 into a network connection Settings 】 【, set the IP to 114.251.156.067, port is set to 4567 confirmed save (individual set-top box port Settings box if required to enter five digits, please use the 0 in front of the 4567 supplement, for example: 04567). Exit menu, debug the satellite receiver to get the test signal (color bar signal, the channel number is 999); Yellow page 6 to TV screens, according to the base station information (line 5), according to the screen, click on the corresponding color (red or orange) button on the remote control to save; Id number 622801 7 after waiting for a period of time (different vendors set-top box will have differences, about 30 seconds), the screen will appear yellow page, according to smart card not authorized, if installation please click confirm button, cancel please press the return key, press 【 confirm 】 button on the remote control; 8 again wait for a period of time (different vendors have different set-top boxes, about 30 seconds), and yellow pages appear on the screen to send success; (if a send failure is shown, the box will be turned off, unplug the power cord and reinstall the SIM card to complete the 3-7 installation.) After receiving the send success message, the top right corner of the screen will show in the installation process, please... The word, about 30 seconds later, shows a picture of the video on the screen. In the upper right corner install process, please later... Contin