Solaris中查看硬件信息常用命令（国外英文资料）.docVIP

Solaris中查看硬件信息常用命令（国外英文资料） See hardware information in Solaris for common commands The 2010-01-31 16:54 How do you view the state of the CPU? # psrinfo - v # mpstat can list the state of a multi-cpu load How to view memory? # prtconf | grep Memory can see how much Memory is. # / usr/platform/sun4u/sbin/prtdiag How do you add swap partitions dynamically? # $su-root - becomes a super user # mkfile 100m/home/swapfile - creates a 100mb Swap file The # / usr/sbin/swap - a/path/filename - activates the swap file # / usr/sbin/swap - l - - validate swap files # / usr/sbin/swap - d/path/filename - cancel the swap file # rm-rf/home/swapfile - delete the swap file How do you check the rate at which the current network card is? # dmesg | grep Link How to adjust the resolution and refresh rate of x-window? The character interface is logged in, running: # / kdmconfig How to use light and floppy drive? General use: # /etc/init. D/volmgt start # volcheck The above method is not good, use: # /etc/init.d/volmgt stop # mount - F hsfs-o ro/dev/DSK/c0t6d0s0 / cdrom - hang up the optical drive # mount - F PCFS/dev/diskette0 / floppy - the floppy drive Solaris defines the system disk file system specification: Ufs - UNIX file system. Is the default file system for Solaris. Hsfs-high density cd-rom file system is a read-only file system. Pcfs-pc file system, which supports DOS formatted floppy disks What are the naming rules for SCSI devices? With the use of the hard disk with the bus controller, the hard disk naming convention for the bus controller is listed below: cWtXdYsZ C Logical controller number T Physical bus target number D Drive number S Slice (or partition) number (0 to 7) Such as: The original interface of /dev/rdsk/c0t0d0s0 which corresponds to the first piece of the first hard drive (root) of the first SCSI target address of the first controller. /dev/rdsk/c0t0s2 the original interface corresponds to the third slice of the first hard drive on the first SCSI target address of