RFC826（国外英文资料）.docVIP

RFC826（国外英文资料） Organization: China interactive publishing network (/) The RFC document Chinese translation plan (/compters/emook/aboutemook.htm) E-mail:ouyang@ Translator: simon_shen shen_jin@263.net Publication date: 2001-9-6 Copyright: this Chinese translation document is copyrighted by China interactive publishing network. It can be reproduced freely for non-commercial purposes, but must Keep the translation and copyright information of this document. The Network Working Group David c. Plummer Request For Comments: 826 (DCP @mit - MC) November 1982 Ethernet address conversion protocol or conversion network protocol address The 48-bit Ethernet address is used for transport on Ethernet hardware (RFC826 -- An Ethernet Address Resolution Protocol or the) Network Protocol Address to the Transmission on Ethernet Hardware directory 1. The 1 2. Show 3 3. Question 5 4. Motivation 5 5. Define 5 6. 6 package format 7. Contract 6 8. Receiving 7 Why do you do 7 Network monitoring and error 8 Example 9 Relevant situation 9 1. In this paper, Through the routing mechanism, the implementation of the protocol P on the sending host S determines that S needs to be transferred to the target host T, which is connected to T In the 10 megabit Ethernet cable connected to S. The actual transport Ethernet packet must produce a 48 bit Ethernet address. The main The protocol P address of the machine is not always compatible with the corresponding Ethernet address (different length or value). Now this protocol allows for dynamic behavior To release Information, which can be used to construct A table in the conversion protocol P address space of A 48-bit Ethernet address. The protocols that allow for the use of non-10mb of hardware are summarized, and radio networks are the hardware. The purpose of this RFC is to propose a transformation protocol address (such as an IP address) for a local network address (for example, Ethernet) Method of addressing. This issue is now widely followed in the AR