木门安装十大步骤.docx

嘉盛木门：木门安装十大步骤10 steps to install a wooden door发布时间：2016-08-10作者：嘉盛木门SEO10 steps to install a wooden door木门安装十大步骤Intall the frame body firstly, ?then use the tapping screws to fix the joint of two sides and the top.将门框主体先组装好， 用自攻螺丝把两侧部件和顶部部件连接起来，形成一个整体。Put the frame body into wall hole, insert the wooden wedge into the gap between ?wall and frame to keep the frame stable.将组装好的门框主体置入门洞中，用木楔塞紧。Use the perpendicular line to ?check whether it is vertical.用线坠调整好门框的垂直度， 木楔加固。Use the edge trimmer to drill the hinge hole , and tighten the screws.用修边机（小锣机）开好门扇合页，上好螺丝。Put the wood pieces to the bottom of the door leaf , make it stand beside the frame, adjust the height. Then draw the hinge rabbet on the frame, and rabbet it. Finally fix and tighten the screws.将门扇用木尖垫底， 靠在门框上，调整好高度，在门框上画上合页槽位，用修边机（小锣机）开好合页槽。Recheck to assure the frame and door are vertical and match well. Use holders to support .重新检查调整门扇与门扇的配合度及垂直度后，用木撑或者撑杆进行支撑。Apply the polyurethane foam to the gap.To make the door stable , please do not move it in 4 hrs.在门框与门洞的缝隙处注入发泡胶， 注胶后4个小时不能受外力影响。Drill the lock hole , install the lock and door stopper.开锁孔，安装锁具、门吸。Install the architrave.安装门套线。Install the weather strip.安装防撞胶条。