3104铝合金冷轧织构调控及其制耳减小方法.pdfVIP

Material Sciences 材料科学, 2011, 1, 101-106 doi:10.4236/ms.2011.13018 Published Online October 2011 (/journal/ms/) A Earing Control Method for 3104 Aluminum Alloy Sheet through Cold Rolling Texture Modification 1 2 2 2 Zhuochao Hu , Yudong Zhang , Liang Zuo , Fu Wang 1Silicon Steel Department, Baoshan Iron and Steel Company Limited, Shanghai 2Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, Northeastern University, Shenyang Email: huzhuochao@163.com Received: Jul. 13th, 2011; revised: Jul. 26th, 2011; accepted: Jul. 29th, 2011. Abstract: The earing of the deep drawing 3104 aluminum alloy depends on the texture of the sheet. This re- search found that increasing the number of rolling passes in the first cold rolling can enhance the intensity of the cold rolling texture components. After annealing, the strong cold rolling texture form the strong recrystal- lization texture. This strong recrystallization texture is largely retained after the finishing cold rolling, which effectively lowers the anisotropy of the alloy and finally reduces the earing tendency. Keywords: 3104 Aluminum Alloy; Earing; Texture 3104 铝合金冷轧织构调控及其制耳减小方法 1 2 2 2 胡卓超 ，张宇东 ，左 良 ，王 福 1 宝山钢铁股份有限公司硅钢部，上海 2 东北大学材料各向异性与织构教育部重点实验室，沈阳 Email: huzhuochao@163.com 收稿日期：2011 年 7 月 13 日；修回日期：2011 年 7 月 26 日；录用日期：2011 年 7 月 29 日 摘 要：3104 铝合金的制耳取决于其材料内部的织构类型和强弱。本研究发现通过增加初次轧制过程 中轧制道次可以有效的增强冷轧织构组分的强度。强的冷轧织构经过退火后形成强的再结晶织构，同 时形成的强的再结晶织构在最终冷轧之后被保留下来，从而获得冷轧织构和再结晶织构的良好匹配，