门路划线涂料(国外英文资料).docVIP

道路划线涂料(国外英文资料) Road reticule coating detailed classification: 1. The room temperature solvent road reticule coating solvent coating performance of traditional reticule coating, the coating drying slow, short service life, low cost, in the urban road and the road is still widely used in general. The market price is 12000 yuan/ton. It is widely used in high grade highways in foreign countries. 3. Type hot melt reflective road marking paint Quick drying, coating film thickness, long service life, good reflective sustainability, the dominant of highway in our country. The market price is about 4000 yuan/ton. 4. Type vibration reflective marking paint Spike type vibration reflective marking paint formula Developed on the basis of the hot melt type, can be used as a deceleration, vibration, warning, USES, such as the rain form has ribs type slot, round dot, the rain. At present, the speed bumps on the highway, the edges, have been widely applied to the vibrating line 5. Water-based reflective road marking paint Drying time, the temperature is below 10 degrees do not recommend the construction, the existing problem is poor for the cohesive force and water resistance of the asphalt. Our country concerned manufacturer introduces foreign water-based marking paint, but in the application process is not satisfied the effect. So water-based coating is still in the development and trial application stage at home. The application effect is not ideal, it is usually not coated with the coating (high cost), so the bonding strength is low, and the problem picture is very clear 6. Hot melt type slippery road marking paint, colored pavement anti-skid coating binder usually adopt good weathering resistance and mechanical properties of alkyd resin, plastic, modified epoxy resin, phenolic resin, or in which mixed with hard and large particles, such as cheap quartz sand or analogues. These fillers are large and protruding from the surface, causing greater friction to achieve the purpose of