胶粉聚苯颗粒(国外英文资料).docVIP

胶粉聚苯颗粒(国外英文资料) Variety: mixed mortar Powder polystyrene particles insulation mortar is a new type of wall insulation materials, composed of powder material and polystyrene particles of light materials, the water can be used, its heat preservation performance is good, construction is simple, strong bond to cover outside surface mortar, fiber reinforced crack can solve the problem of crack surface empty drum, etc. Product features Colloidal polyphenyl particles have excellent weatherability. The thermal conductivity is low, the insulation is stable, the softening coefficient is high, and it is anti-freezing and anti-aging. The rubber powder polystyrene particles adopt flexible anti-cracking technology. The variation of elastic modulus of each layer is matched by layer gradient, which allows the deformation to be combined with the restriction of deformation, and can disperse and decomstress the deformation stress at any time. The adaptability of the base deformation is strong, preventing the production of wall cracks effectively. The powder polystyrene particles are protected by anti-cracking mortar and anti-alkali fiberglass fabric, which effectively solve the problem of empty, drum and crack in the insulating layer. The system has no cavity, strong resistance to negative wind pressure, which is suitable for multi-storey and high-rise buildings. It is breathable and has a good breathing function, it has good waterproof function, and it can also relieve the moisture of the insulation layer. The rubber powder polyphenol particles are rated B1. The powder is high in gas, high tensile shear yield strength, high bond strength, high interfacial infiltration performance, and the ability to be easy and cohesive. The polystyrene particles are completely covered by the size of the paste, mixing and reuniting, which is not slippery in use, easy to make and operate, and fast. The ability of colloidal polyphenylene particles to correct the deflection of the structure is good, and