联锁表(国外英文资料).docVIP

联锁表(国外英文资料) The recommended route should be listed when there are many ways of entering the end of the road into the road. The continuation of the route number shall be made up of the number of the number of the car and the number of the way into the road. 4. Route way bar: when there are two or more ways, basic road rules as the first way, should be writing a 1 in the bar, writing 2 change into the road. The button column that is placed in the path: the button name that should be pressed when filling in the path. 6. Determine the direction of switch bar: when there are more than two kinds of operation mode, in order to distinguish the opening of the route, should fill in the difference between open access key to switch in position. Signal line: the name and display of the signal that should be open when entering the route. The color signal should be indicated by the display color. The path indicator can distinguish between the left, middle and right lamp bits, and the light bits in the three directions are represented by the two groups of the signals. The switch column: the order filling in all the branches and the protection and the number and position of the switch. Note that when the antino-debits should be added (), the barrier should be added [], which should be added {}. For example, [(9/11)] indicates that the barrier 9/11 is in the opposite position. Enemy signal: fill in all the hostile signals that are in the path. The way it is filled is as follows: Fill in the train and shunting signal: S5, for example: S5 signal of trains and shunting signal are tier approach hostile signals for S5, S5 signal train signal for tier approach hostile signals for S5L, S5 signal of shunting signal for the rank in the hostile signals when remember S5D; The way the signal is filled in: D1, the D1 signal is a hostile signal for the line. Conditional hostility: such as 5 D3, the D3 signal that is located by the number 5 is the enemy signal to be in the line. Track circuit se