投影机进进工厂形式的方法(国外英文资料).docVIP

投影机进入工厂模式的方法(国外英文资料) SONY (SONY) : Maintenance menu (for most of the SONY model) : in standby, in turn in the following order to ENTER, ENTER, direction, the direction of the next, ENTER, the press, there will be a top left after one S word maintenance menu; 2, HITACHI: Watch time: press the RESET button for 3 seconds after turning on. Maintenance menu: turn on, press the menu and press the RESET button for 3 seconds. Panasonic: The projector selects OSD from the menu and holds the ENTER key for 3 seconds for the maintenance menu. EIKI, sanyo: CANON Look at the time: hold the key on the menu for 20 seconds. SU50 presses the POWER button 30 seconds into the time menu; LG projector: Some models also use the trapezoidal correction key and the menu single key. (it also applies to certain models of the morning star); EPSON: Method 1: most of the models maintenance menu: also press the menu + help key. Method 2: press HELP for 3 to 5 seconds; BENQ (BENQ) : The VP150 projector presses EXIT 3 seconds, enters the bulb time, and then in the EXIT and direction. 8, the panasonic AE500 factory mode entered the secret technology! Similar to AE300, you can enter the factory mode after the MENU in other Settings (the company should be option) and hold enter for 5 seconds. At the bottom of the web, there is a discussion of the changes (see the link below). Whether its desk or ceiling, the default value and the best value are: Green: 2A (which doesnt work, still flash, 2A is the smallest value) Red: 2B (comfortable with no adjustment) Blue: 27 (moving right to 2D looks the most comfortable) Sharp AN200X goes to the maintenance menu: Top, bottom, left, right, ENTER projector bulb, copy: 5BENQ 655 series of machine access maintenance menu mode: Hold the upper key of the direction, and you will have time to talk, while holding down the AUTO + SOURCE key. I advise you not to fiddle with the data. Canon S2 (Canon) S2 look at machine time (other models I cant guarantee) : Turn it on and h