技规调车(国外英文资料).docVIP

技规调车(国外英文资料) Chapter xii is working in a car General requirements Article 217 (202) at the station, the railway station shall be made in accordance with the technical procedure of the station and the plan for the transfer of the car. The personnel involved in the adjustment of the operation should do: To compile and disintegrate the train in time to ensure that the train is not affected by the departure of the train according to the schedule of the train. Take delivery of the passenger goods and repair vehicles in time; Make full use of the locomotive and all technical equipment, adopt the advanced working method, complete the transfer task at the minimum time. Carry out the standard of operation conscientiously, ensure the safety and safety of the personnel involved. Specified in article 218 (article 203) shunting work needs to be fixed operational areas, line use, shunting locomotives, personnel, shift, shift hand-over time, location, tools, quantity and its location. To make a fixed replacement locomotive and small running locomotive, it should meet the condition of the train locomotive (headlamp, armrest, anti-slip pedal, etc.). Article 219 (204) the station where the traffic is busy and the wiring is more, can be divided into several adjustment zones. Do not have the connection and protection, no more area or transfer operation. The link and protection measures for the operation of the train-engine area shall be stipulated in standing fine. Article 220 (article 205) the adjustment of the car shall be equipped with the light of the radio, and shall be in accordance with the relevant requirements. The adjustable light show equipment should be wireless train running monitor and record device, wireless light show the use of equipment, maintenance and management measures shall be formulated by the railway. The wireless switch will stop the hand signal when the device is properly used, and use the call mode instead of the one that is visible to the lamp. Switch to h