实体检测_施_工_方_案(完)(国外英文资料).docVIP

实体检测_施_工_方_案(完)(国外英文资料) Structure entity detection plan The city forest fengshang residential area 1 #, 2 # building And underground garage engineering Structure entity detection plan Package case Preparation: Reviewer: Approval: Anhui jiqiang construction co., LTD On January 26, 2015 Orders to record As a general introduction to the project......... 2 Make reference to............... 2 Structural entity testing requires...... 2 4, the production requirements and curing conditions of the specimen... 4 Five, the structure entity test USES the same condition to try a block schedule......... 5 6, the control measures for the thickness of the steel reinforcement protection layer...... 7 First, the general situation of the project Construction units: wuhu and grun property co., LTD Survey unit: wuhu city survey and mapping design institute limited liability company Design unit: China railway urban planning and design research institute limited Supervision unit: the construction project supervision co., LTD Construction unit: anhui jiqiang construction co., LTD The project is 2 small high-rise residential buildings, ground 11, underground 1 floor, frame shear wall structure. The building area of 1 # is 7366m2, the building area of 2 # is 6120.98 m2, the project is located in the south side of the rich people road in sun village, and the construction period is 334 days. Second, the formulation basis L gb50300-2013 uniform standards for quality acceptance of construction projects L GB/T50107-2010 criteria for assessing the strength of concrete L GB50204-2002 quality acceptance and acceptance of concrete structures L GB/T50344-2004 architectural inspection technology standards Third, the structure physical examination requirement Structural physical examination should be carried out on important parts of concrete structure safety. The structural entity inspection shall be carried out by the construction project technical director, under the witness of the supervision engine