XF型复合式水膜脱硫除尘器(国外英文资料).docVIP

XF型复合式水膜脱硫除尘器(国外英文资料) XF type water membrane desulphurizer First, the basic principle The overflow compound water film dust remover is mainly composed of the main cylinder, upper note cistern, lower spillway hole, cleaning eye and so on, its working principle is: by importing the flue dust air into the cylinder. Cylinder is a circular cylinder, the upper note sink into the barrel water from dust catcher, make whole cylinder wall to form a layer of water film flowing from top and bottom, the flue gas from the cylinder bottom tangential to and in the cylinder body rotation, dust gas under the action of centrifugal force is always with the cylinder body wall friction of water membrane, such dust gas membrane wet by water, dust particles with flow to the bottom of the dust catcher, walk from spillway hole row. The bottom of the barrel is sealed and a water seal is provided to prevent the smoke from leaking out from the lower part, and the cleaning of the shaft is convenient for the bottom of the barrel. After dust removal, the waste water is discharged from the bottom overflow hole into the depositing tank, the precipitation is neutralized and the circulation is used. After purification, the gas is removed by the upper cone part of the cylinder, thus achieving the purpose of dusting. If the water is added to the circulation pool, it can be desulfurized. Two, structural characteristics Using natural granite, it is machined into circular curved plate, and the overall structure is smooth and smooth. Corrosion resistant, wear resistant, high temperature resistance. External use of high temperature resistant acid alkali material. The steel mesh is molded by steel mold. The upper tank is a ceramic structure, which ensures that the water is not leaking during use. Because of the use of the body of each section of the body, each section has a concave and convex seam at the end of each section, and the sealing connection is applied to the seam of the joint at the time of instal