TSPT2011新标准版升级具体说明(国外英文资料).docVIP

TSPT2011新规范版升级详细说明(国外英文资料) The TSPT2011 specification update details The content of the upgrade was 2011-6-9 data Supports PM10 data. The above is a picture of the March 2011 version of PM2011, as long as the data can be properly embedded with this image, and this edition still supports PM08 SATWE. Support for REVIT data, adding options to the functionality of the data. The REVIT data is a file, not a directory. When there is a high difference, the location data of the column may be correct for the wrong data. Beam is set when the elevation difference is easy to appear this kind of circumstance, put A data on the B, the original only make mistakes only when the side elevation difference, found in practical engineering. Modify the problem that the steel component cannot be filtered automatically. If there is steel component in structural arrangement, sometimes it cannot be filtered, and the number of column is wrong. Modified the closed circular beam on the end of a straight line beam. As you can see in the picture, it used to be a dead machine. The template The data draw plane, which adds the standard layer number after the floor number shown in the floor plan, is convenient to check. The first is the natural layer number, and the second is the model standard layer number Wall beams and frame girder interchange ability records the standard layer information. This allows for a change of information that is modified by a standard layer and all other layers are automatically changed. Turn the PM diagram and change the BUG of a dead machine. Flat method column Wall column setting, change the default value, the dark column connection spacing change to 200, increase the high gauge option, the dark column length is changed to 300. Automatic drawing frame column \ full picture is constructed with structural reinforcement \ drawing reinforcement, and the minimum reinforcement rate of frame column is modified. The minimum reinforcement ratio of the frame column in the new sp