打印机的使用方法(国外英文资料).docVIP

打印机的使用方法 1, two single copy to a double: the formation of the first to determine the machine has double sided, it is best to have lost draft apparatus (not lost manuscript, double-sided machine is not much point), and then put the two pieces of original draft on losing, on the operation panel to choose one to double, click on start! If you do not have a draft, you will have to scan the two manuscripts and then move them from the operation panel! 2, two copies of a single face to form a single face: operating panel operation two in one. 3, a double-sided copy is a two-sided copy: first, make sure that the machine has two sides and two sides, and then choose double to double. Electrostatic copying machine is a kind of automated office equipment, it can improve the speed of official document form, save a lot of waiting time, bring great convenience of office work. But because the operation of the copier is a strong technical work, dont understand the basic principle of the machine and structure, cant use it correctly, sometimes damage due to improper operation machine, affect the use. Heres a talk about the use of copiers and the experience of some copiers. One, the operating procedure of the photocopier 1. The preheating Press the power switch and begin to preheat the panel, which should show the light on the panel and wait for the signal. When the warmup time is reached, the machine can begin to copy, which can be copied or told by audio signals. Check the original Take after need to copy of the manuscript, should roughly go through, need to pay attention to the following aspects: the original paper size, texture, color, the writing on the original color, the original binding way, the original number of sheets and any picture need to change the exposure of the manuscript. These factors are all about the photocopying process, and you have to be aware of it. No clear handwriting or line should be written before photocopying, so as not to rework. The original manuscript