巨象货架应用说明(国外英文资料).docVIP

巨象货架使用说明 Shelves manufacturers although many, but the shelves use specification is the same, whether in handan shelves manufacturers or other cities shelf factory is not exceptional also, depending on the type of shelves of the specifications of the sorted out as follows: According to the shelf, fixed or mobile, can be divided into: Type (1) fixed duty shelf: it is fixed shelves can be subdivided into the shelf plate type, tray type, through type, gravity, pressure into the type, the attic type, steel structure platform, cantilever type, mobile type, drawer and bracket type shelf, etc. (2) mobile shelving: mobile shelving can be subdivided into mobile racking and rotary shelves, mobile shelves and can be subdivided into the light of medium-sized mobile racking (also known as dense frame, can be divided into manual and electric), heavy tray type mobile shelves, rotary rack and can be subdivided into horizontal rotary and rotary shelf two straight. The overall structure of the shelf is either welded or packaged. (1) welding shelves. (2) packaged shelves. At present, most of the domestic use of packaged shelves. The link between the shelf system and the warehouse structure is divided into: (1) the shelves are one in one. Racking system and building roof and constitute an integral whole, directly by the shelves pillar support roof load, installed on the pillars on either side of the building palisade structure (the wall). (2) separate structural shelving. Shelf systems and buildings are two separate systems that have no direct connection to each other. The weight of each floor of the shelf is roughly divided into: (1) lightweight shelves: no more than 200kg of weight per layer. (2) medium-size shelves: 200 ~ 500kg for each floor. (3) heavy shelves: each layer weighs more than 500kg. The shelves are divided in height (1) low shelf: below 5m. (2) high shelf: height 5 ~ 12m. (3) super high shelf: more than 12m. The structural characteristics, application scope and selecti