SPO2-CB2血氧模块仿单(国外英文资料).docVIP

SPO2-CB2血氧模块说明书 . . . . . . . . . Spo2-cb2 pulse oximetry module Technical and usage specifications 12 directory Overview of the pulse blood oxygen module in spo2-cb2 Product size Power supply and power consumption The signal interface Communication protocol Performance indicators Matters needing attention After-sales service Contact us Spo2-cb2 pulse blood oxygen module product overview overview SPO2 - CB2 blood oxygen module USES the new digital signal processing technology, in the condition of low signal noise ratio (SNR), such as weak infusion), through technical methods to reduce the effect of external noise, more routine blood oxygen technology products, significantly enhance the measuring accuracy and stability of the results. This module is an independent digital blood oxygen saturation measurement components, can be built in many lives parameters monitor, or carrying oxygen measuring instruments and other equipment need to measure the blood oxygen saturation. Complete the human oxygen saturation measurement, as shown in figure 1. Optional finger/forehead reflection-type probe blood oxygen measurement module can be built into a new device Figure 1. Application of the oxygen measurement module Main features: U adopts digital signal processing technology to support weak perfusion (weak pulse) measurement. The conventional blood oxygen measurement technology has obvious anti-interference advantages. U is able to use the blood oxygen probe with a finger clip, and also use the reflexographic blood oxygen probe and the newborn package probe. U USES a homemade imitation Nellcor series of blood oxygen probes or a copy of the BCI type blood oxygen probe. You can also use the original imported Nellcor blood oxygen probe and OxiMAX blood oxygen probe. U design are measured with a large dynamic range, when the blood oxygen saturation value, pulse frequency and pulse strong three parameters in a wide range of cross changes will still be able to keep the measuring result