BS光亮油(国外英文资料).docVIP

BS光亮油 High pressure hydro-bs light oil The enterprise standards of karamay petrochemical High pressure hydrogen-white BS light oil Standard code: Q/SY kl0035-2001 project Quality indicators Test method for Bs 90 Bs 120 Bs 150 Bs 200 Bs 250 Kinematic viscosity, was/S, 40 ℃ The report The report The report The report The report GB/T265 Kinematic viscosity, was/S, 100 ℃ 16-22 28-34 28-34 38-46 48-60 The viscosity index is not less than that 70 90 85 65 60 GB/T1995 appearance Clear and transparent, no suspension visual Chromaticity, no greater than 0.5 GB/T6540 Neutral value mgKOH/g is not greater than 0.03 GB/T4945 Pour point, ℃ higher than not - 15 - 15 - 15 - 10 - 10 GB/T3535 Flash point (opening), ℃ below 220 235 245 260 260 GB/T3536 Carbon residue, % 0.1 GB/T268 Aniline point, ℃ The report GB/T262 Sulfur, % The report GB/T387 N, % The report GB/T9170 Alkaline nitrogen, % The report SH/T0162 Density (20 ℃), kg/m3 The report GB/T1885 Oxidation stability (150 ℃), Min is no greater than that 350 350 350 300 300 SH/T01931 KPH series of high grade alkane rubber oil Product introduction The product is made of karamie, which is based on the low condensation ring alkyl, and the regular decompression distillation is cut into suitable distillate. The production of the final product is produced by using three high pressure hydrogenation processes of special catalysts. Product features Low dip (coagulation) and excellent cryogenic liquidity, no coagulant; High alkanes, more than 60% of CPS in carbon analysis data; The residual aromatic hydrocarbon is very low, the naphthene content is moderate, the solubility is good. A stable carbon skeleton and reasonable hydrocarbon composition; The product is highly refined and maintained with rubber Good intermiscibility. The main purpose It is mainly used for the processing of rubber products that are high in photothermal stability, and the use of chain base filling oil, especially suitable for the use of rubber with special requirements