烤漆龙骨矿棉板、微孔铝方板吊顶施工工艺.docVIP

烤漆龙骨矿棉板、微孔铝方板吊顶施工工艺 烤漆龙骨矿棉板、微孔铝方板吊顶施工工艺提要：固定骨架的连接件：骨架的横竖杆件是通过连接件与结构固定，而连接件与结构之间可以与结构的预埋件焊牢，这一种方法较灵活，尺寸误差叫小 更多资源来 烤漆龙骨矿棉板、微孔铝方板吊顶施工工艺 1、施工程序：弹线→固定骨架的连接件→固定骨架→安装矿棉板、铝方板。 2、施工工艺及施工要点： A、弹线：先将楼、地面标高基准线弹出，以楼、地面标高基准线为为准，弹出设计要求的天花标高； B、固定骨架的连接件：骨架的横竖杆件是通过连接件与结构固定，而连接件与结构之间可以与结构的预埋件焊牢，这一种方法较灵活，尺寸误差叫小，容易保证质量的准确性，故而较多采用。连接件施工，主要是保证牢固。膨胀螺栓的埋入深度等方面，都应严格把关，对于关键部位，如大门入口的上部膨胀螺栓，最好做拉抜实验，看是否符合设计要求。型钢一类的连接件，其表面应镀锌，焊缝处应刷放锈漆。 c、固定骨架：骨架应先进行防腐处理。安装骨架位置准确，结合要牢固。安装后，检查中心线、表面标高等。为了保证板的安装精度，宜用经纬仪对横竖杆件进行贯通。变形缝、沉降缝、变截面处等应妥善处理，使之满足使用要求。 D、安装矿棉板、铝方板：先将板托起，然后将其一端压入板龙骨卡槽内，再顺势将另一端压入板龙骨另一卡槽内，所有板纵横方向均应严格对齐，接缝必须笔直一条，不得有弯斜。 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological quality and image quality. The formation of excellent moral education curriculum system and management system, the construction of school.