xx公司桥牌协会管理办法.doc

xx公司桥牌协会管理办法 总 则 协会章程规定，桥牌协会实行会员制协会对所属会员具有业务指导和管理的权利。协会将依据规章，指导和管理所属会员开展桥牌活动。 会员入会办法 填写xx公司桥牌协会会员入会申请表。自愿申请加入xx公司桥牌协会；遵守《桥牌协会章程》，履行会员义务，维护桥牌协会声誉；如违反xx公司桥牌协会有关规定，愿意接受xx 公司桥牌协会的处罚。桥牌协会章程 xx 公司桥牌协会会员入会申请表 姓 名 性 别 小二寸 照 片 文化程度 出生年月 身份证号 参加工作时间 联系方式 是否愿意加入本协会 是 □ 否 □ 是否愿意遵守本办法 是 □ 否 □ 本人签字： 年 月 日 以下内容由xx 公司桥牌协会填写 会员编号 注明： 1、此表格用钢笔或签字笔正楷字体填写(涂改无效)，一式两份； 2、本办法由xx 公司桥牌协会负责解释； 3、不遵守本办法的会员将取消其会员资格。 or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test and performance test copies of the record. If necessary, review