PBT_RG301料的使用手册.docVIP

Product Information PBT-RG301 Product Information Update:  TIME \@ M/d/yyyy 4/27/2017 PBT-RG301 Reinforced Flame Retardant PBT FEATURESAPPLICATIONSFlame retardant High mechanical strength High heat resistance Good electrical properties No bloomingInjection molding Household appliance parts Bobbin Lighting parts Relay Linker Properties[1]Test Method ASTMTest ConditionS.I. UnitsTypical Values[2]MechanicalTensile StrengthD63810mm/minMPa120Elongation at breakD63810mm/min%2.6Flexural StrengthD7902mm/minMPa190Flexural ModulusD7902mm/minMPa9000Impact Strength, IZOD notchedD2563.2mm, 23℃J/m80Rockwell HardnessD785R-Scale-120ThermalHeat Distortion Temp.D6480.45MPa, 6.4mm℃2201.8MPa, 6.4mm℃210Electrical Volume ResistivityD257-W· cm1016OthersSpecific GravityD79223℃g/cm31.64Glass Fibre Content--%30Mold ShrinkageD95523℃%0.3/0.9Water AbsorptionD57023℃,24hr%0.07FlammabilityUL940.75mmClassV-03.0mmClassV-0 [1] The values of pigmented material may be different. [2] The listed values are measured by test specification and used for referential purpose only. Processing Conditions Start PointRangeMelt Temp.250℃240-260℃Barrel Zone Temp.Rear235℃220-240℃Center245℃235-255℃Front255℃240-265℃Mold Temp.60℃50-70℃Processing Temp. Limit265℃Injection SpeedModerate to highPre-Dry Requirements120～140℃, 4～6hrThe data sheet is just for reference. In actual injection process, the molding parameter should be adjusted by construction of mold, shape and size of product, and so on. SAFETY AND HANDLING CONSIDERATIONS Material safety data sheets for resins are available from Kingfa Sci. Tech. Co. and its subsidiaries. MSD sheets are provided to help customers satisfy their own handling, safety, and disposal needs, and those that may be required by locally applicable health and safety regula