激光机3320故障处理选编.pptVIP

; 激光机故障处理课件目录; 开机白灯闪烁不停，无法正常进入系统 ;开机白灯闪烁不停，无法正常进入系统，按RESET键后就正常了 ;开机正常，但键盘一直显示  waiting for laser ; 开机正常，但键盘显示no connection 20秒后重新连接 ;打印过程中出现信息中缺笔画现象，时好时坏 ;开机正常但软件无法连接，保存信息很慢或者死机 ; 激光漏光 ; 打印变弱 ; 无激光输出， 但无报警 ;手持键盘无法进入操作界面，显示两行或三行英文 ; 机器I/O信号状态不正常 ;W00002 Incomplete marking, product movement too fast E00105 Marking aborted, product movement too fast ; E00200 Laser not ready ; E00204 General error ; E09002 Marking head: Overpositioning of X mirror 或E09003 Marking head: Overpositioning of Y mirror 或E09004 Marking head: Overcurrent of X mirror 或E09005 Marking head: Overcurrent of Y mirror 或E09006 Marking head: No X mirror connected 或E09007 Marking head: No Y mirror connected ; E09002和E09003同时出现 ;W00908 Parts of the marking are not within the marking field of the marking head ;E09012Communication error ACC - FM：MHI: Gaps in the data flow 或E09021 Internal error: Cannot set control mode of the FM：MHI 或E09022 Internal error: Cannot set configuration mode of the FM：MHI 或E09101Internal error: Error status of the FM/MHI cannot be reset 或E09102Interrupted communication with marking head ;E10302Shutter does not stay open. 或E10303Shutter does not stay closed ;E10003Cannot write (all) to the backup of the system database ; E10401 Template invalid ;E10408 The beam shutter does not close 或 E10407 The beam shutter does not open ;E10411 External text: name: Value can only be marked once ;W10504Not all previously used templates have been saved 或W10505The template used last was not saved ;W10506Invalid value of absolute operating hours in SRAM E19309The clock had to be restarted. Please set the time ;E19307The circuit for external laser enable has been opened. The laser stop switch has been pressed ;E10408,E9022,E9101,E9102,F10515 ;教师手册; 试 题