The products of DeLan company.docVIP

products 1、Steel Wire Belt 1)The type from N-TGD315 to N-TGD2000； 2)From the working ?temperature??is divided into T2 and?T3；T2 type：?The normal working temperature is 120℃，a higher moment temperature resistance which can reach to 150℃ T3 type：the normal is 150℃，the moment is 180℃ 3)From the drawing force is divided into ST1600,ST2000,ST2500 ST1600 means the breaking load is 1600N/mm ST2000 means it is 2000N/mm ST2500 means it is 2500N/mm The brand of steel wire belt is Aneng (Goodyear plants in China) The punched hole equipment is Hydraulic?machine,which is the same as Hefei?cement Institute. 2、Head Pulley Plastic-covered Segments(with bolts and nuts) 1)It consists?of 5?pieces,including bolts and nuts; 2)The rubber?is imported; We are?using the cold vulcanized gluing technique. Comparing the cold and heat vulcanized gluing technique specs: Heat Cold Adhesion with the Metal drum 3-8N/mm 12N/mm vulcanizing? pressure 6-8kg/cm2 50kg/cm2 abrasion? coefficient 300mm3 120mm3 friction? factor 0.39-0.45 0.42-0.51 Operation ?life(normal?working?condition) 2years Over 3 years Hardness? properties? of rubber Fast?aging?leads?to?excellent?rubber,cause adhesion?of the?material?and?cause?damage?to the?belt Rubber?has?good?elasticity,?good?adhesion?prevention,?greatly?enhance?thebelt?life 3、Belt Joint Device(include the main and auxiliary ) 1)Special?Aluminum Alloy?Material?for?aircraft; 2)The hardness?up?to?120; 3)It?includes?belt?clip,?belt?clip?bolt,?AB?glue,?plastic?boxes,?limitedblocks and?steel?buckle. 4、Rubber plate(Flat type) high?temperature resistance Intermediate?thickness?5mm 3)This?is?Portland?products?before?2010 5、Rubber plate(No Flat) No-Flat Rubber plate higher?temperature resistance The ?Binding is strong with buckets Intermediate?thickness?10mm 4)This?is?Portland?products?after?20