Aquasana阿夸莎娜净水机安装说明书.pdfVIP

Installation Instructions AQ-5200 AQ-5300 Under Counter Water Filter Two Stage (5200), Three Stage (5300) systems Welcome to the Aquasana experience. You are about to enjoy clean, healthy water and the peace of mind that comes from knowing award-winning filter technology is working for you. Installation must comply with state and local laws. Contents The AQ-5200/5300 comes in three designer finishes, Chrome, Brushed Nickel and Oil-Rubbed Bronze. The faucet may be mounted on the sink using an existing hole for a sprayer nozzle or soap dispenser, or by drilling a hole at least 1/2” in diameter. Be sure the location of the faucet allows the spout to extend slightly past the edge of the sink. Note: we recommend enlisting the services of an approved or certified professional if drilling is required. The AQ-5300 Three Stage Under Counter Filter unit and three pre-installed filters. The AQ-5200 Two Stage Under Counter Filter unit and two pre-installed filters. Tools Recommended for Installation ? Variable speed drill ? Adjustable wrench ? Measuring tape ? Bucket ? Phillips head screwdriver Before beginning installation, please ensure all parts listed are present. If any part is missing or damaged, do not attempt to install the filter. Please contact Customer Service for replacement parts at (866) 662-6885. Estimated Installation Time: 45 minutes Preparing for Installation Please read entire installation guide before installing the filter system. Chrome Brushed Nickel Oil-Rubbed Bronze Easy to install 1. Unpack and unwrap contents. Turn off and disconnect the cold water supply. 4. Unit Installation: Select a space under your sink to install the filter unit that allows easy access to your cold water supply and for filter replacements. 9. Turn the cold water on. Check for leaks and proper installation: place a towel under the filter unit and check for leaks. Allow water to run for 10 minutes to flush carbon fines. Note: Never use oils to lubricate