Section-ChainLinkFencesandGates.docVIP

04-08M 32 31 13-page \* arabic8 SECTION 32 31 13CHAIN LINK FENCES AND GATES SPEC WRITER NOTES: Delete or add information between //// and any other items applicable to project. Cover any item added to the text under Applicable Publications and Products and renumber the paragraphs. Use this section in specifying permanent chain link fence. Specify impermanent type fencing, such as Construction Fence, elsewhere. PART 1 – GENERAL 1.1 DESCRIPTION This work consists of all labor, materials, and equipment necessary for furnishing and installing chain link fence, gates and accessories in conformance with the lines, grades, and details as shown. 1.2 RELATED WORK A. Grounding of fencing for enclosures of electrical equipment and for lightning protection as shown: Section 26 05 26, GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS. B. Temporary Construction Fence: Section 01 00 00, GENERAL REQUIREMENTS. C. Finish Grading: // Section 31 20 00, EARTH MOVING //, and Section 32 90 00, PLANTING //. D. Guard Booths: Section 13 34 19, METAL BUILDING SYSTEMS E. Card readers and biometric devices: Section 28 13 11, PHYSICAL ACCESS CONTROL SYSTEMS F. Intrusion alarm: Section 28 16 11, INTRUSION DETECTION SYSTEM G. Security fences: Section 32 31 53, PERIMETER SECURITY FENCES AND GATES. 1.3 MANUFACTURERS QUALIFICATIONS Fence, gates, and accessories shall be products of manufacturers regularly engaged in manufacturing items of type specified. 1.4 SUBMITTALS A. In accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA AND SAMPLES, furnish the following: 1. Manufacturers Literature and Data: Chain link fencing, gates and all accessories. 2. Manufacturers Certificates: Zinc-coating complies with complies with specifications. SPEC WRITER NOTE: The requirement for shop drawings shall be included for special items, such as sliding gates. See TECHNICAL NOTES. Alignment Certification requirement is for property line fencing or similar purpose requiring accurate alignment. //B. Sho