- 1、本文档共6页,可阅读全部内容。
- 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 5、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 6、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 7、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 8、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
ConstructionSpecification—WireMeshGabionsandMattresses
NRCS - 764- PAGE 6
AL - EWP -
Construction Specification 764—Wire Mesh Gabions
1. Scope
The work consists of furnishing, assembling, and installing rock filled wire mesh gabion baskets as shown on the drawings.
2. Material
Gabions shall be fabricated, assembled, and installed in accordance with the nominal wire sizes and dimensions shown in Tables 764–1, using the following materials unless otherwise specified in Section 7.
Table 764–1 Minimum requirements*
Gabion baskets—height 12, 18, or 36 inches; length as specified
Type of wire Mesh Wire PVC Total Galvanized size diameter coating diameter coating (in) ???(in) ???(in) ???(in) ?oz./ft2
Woven mesh 3.25 x 4.5 0.118 None 0.118 0.80
3.25 x 4.5 0.105 0.02 0.145 0.80
Selvage 0.153 None 0.153 0.80
0.132 0.02 0.172 0.80
Lacing and internal 0.086 0.02 0.126 0.70
connecting wire
Welded 3 x 3 0.118 None 0.118 0.80
Mesh 3 x 3 0.105 0.02 0.145 0.80
Spiral binder 0.105 0.02 0.145 0.80
*Note: The wire sizes and PVC coating thickness shown are nominal sizes. The wire sizes include the galvanizing coating thickness.
Wire for fabrication and assembly shall be hot-dipped galvanized. The wire shall have a minimum tensile strength of 60,000 pounds per square inch. Galvanized steel wire shall conform to ASTM A 641, class 3, soft temper.
When epoxy or polyvinyl chloride (PVC) coated wire is specified in section 7, the galvanized wire shall be coated by fusion bonded epoxy; fusion bonded, extruded; or extruded and bonded PVC material. The wire coating shall be black, gray, green, or silvery, and the initial properties of the PVC coating shall meet the following requirements:
a. Specific gravity. In the range of 1.30 to 1.40, ASTM D 792.
b. Abrasion resistance. The percentage of weight loss shall be less than 12 percent when tested according to ASTM D 1242, method B, at 200 cycles, CSI-A abrader tape, 80 grit.
c. Brittleness temperature. Not higher than 15 °F, ASTM D 746.
d. Tensile strength. Extruded coating (not les
文档评论(0)