ModelAVR10DDuplexedVnetRouter.PDFVIP

Contents Index Model AVR10D General Duplexed V net Router Specifications GS 33K50D10-50E n GENERAL These Bus Converters connect CENTUM VP Human Interface Stations (HISes) on the Vnet/IP to CENTUM VP/CENTUM CS 3000/CENTUM CS stations on the V net, CENTUM CS 1000 stations on the VL net in other domain. To connect to CENTUM CS 3000/CENTUM CS System, LHS4450 Multiple Project Connection Package and LHS5450 Multiple Project Connection Builder are required. To connect to CENTUM CS 1000 System, an Ethernet, as well as these packages, is also required. n HARDWARE SPECIFICATIONS For the installation specifications and environmental conditions that are common to the systems, refer to “Integrated Production Control System CENTUM VP System Overview (Vnet/IP Edition) (GS 33K01A10-50E).” F01E.ai Communication on the Vnet/IP Side Communication Speed: 100 Mbps, Full Duplex Power Supply Connection: UTP cable (CAT5e or better), (Specify with Suffix Code) RJ45 connector Voltage: 100-120 V AC, Frequency: 50/60 Hz Interface: 100Base-TX compliance Voltage: 220-240 V AC, Frequency: 50/60 Hz Max. distance: 100 m (Distance between AVR10D Voltage: 24 V DC and Layer 2 switch) Power Consumption Communication on the V net Side 100-120 V AC: 80 VA Communication Speed: 10 Mbps 220-240 V AC: 110 VA Connection: Coaxial cable, BNC type 24 V DC: 1.7 A Dual-redundant or single Power supply method dual-line or single power line For CENTUM VP, CENTUM CS 3000 and CENTUM C