ISO-DEButterflyValve.PDFVIP

Mueller Co. International Division ? 6125 Preservation Dr., Suite 200 ? Chattanooga, TN 37416 USA p +1.423.490.9555 ? f +1.423.531.0033 ? international@ ? Reliable ConnectionsTM ISO-DE Butterfly Valve DN100-DN1800 PRODUCT FEATURES Form 13013 – Rev 10/16 ? Model: ISO-DE (Double Eccentric) Flanged Butterfly Valve. ? DN100 – DN1800. ? Pressure Class: PN10 or PN16. ? Body Style: Short (ISO-DES) and Long (ISO-DEL). Body face to face, flanged ends drilled in accordance with EN-558-1/ISO 5752/BS EN 1092. ? Ductile iron Body and Disc, ASTM A536 Gr. 65-45-12 standard. ? Rubber Seat mechanically retained in disc by means of a specially engineered stainless steel Seat Retaining Ring and stainless steel nylon Lock Screws. ? Actuation Options: Gear with Handwheel (standard), Hydraulic Actuation, Pneumatic Actuation, Electric Actuation. ? Epoxy coating system approved for drinking water applications. Fusion bonded epoxy coating on valves up to DN1200 standard. ? Range of Applications: Water, sea water*, high temperature*, gas*. ? Stainless steel dry shaft, shaft completely sealed by rubber O-Rings on sealing sleeve and dry pins. ? Teflon lined filament wound bearings for long service life and lower operating torque. ? The design of the seal retaining ring allows the disc to seal tightly while retaining the seat in position against high pressure and flow. ? Specially engineered seat sealing system gives longer service life and lower operating torque. I N T E R N AT I O N A L D ATA S H E E T * Available for these applications upon request. Please contact Pratt or your local sales representative for details. DN300 - DN1800 Dual Shaft Design DN100 - DN250 Single Shaft Design Copyright ? 2016 Henry Pratt Company, LLC. All Rights Reserved. The trademarks, logos and service marks displayed in this document herein are the property of Henry Pratt Company, LLC, its affiliates or other third parties. These products are intended for use in potable wate